A new thin-film battery has electrodes made of polymer-coated paper and an electrolyte made of salt-soaked paper. A laboratory prototype shows the cell pressed between glass slides and packaged At Uppsala University in Sweden, researchers have developed a flexiblebattery made of two inexpensive materials: cellulose and salt.
The cellulose is derived from a polluting algae found in seas and lakes. The algae's walls contain cellulose that has a different nanostructure, which gives it 100 times the surface area.
The battery is made by coating the paper, made from this cellulose, with a conducting polymer and inserting a salt-solution-soaked filter paper between the paper electrodes.
Chlorine ions travel from the batteries positive terminal to the negative terminal while current is produced in the external circuit by the flow of electrons.
The battery can be recharged in tens of seconds because the ions flow through the thin electrode quickly. In comparison to a lithium battery that would take 20 minutes to recharge.
The salt and paper battery is still in the early stages of development as compared to other thin-film technologies. For a battery to be cost effective you need to able to obtain the material at relatively low cost and have a good manufacture process in place.
The battery could be produced commercially in about three years and made available to distributors. link..
